FUTK3201
Product Description
This is the Futaba 3PV 3-Channel Radio System
with the 3-Channel R203GF Receiver.
FEATURES: FHSS/T-FHSS, S-FHSS protocols Large, easy to read programming screen Four wheel steering and brake mixing Model data copy Anti-lock brake system (ABS) function R203GF 3-channel receiver is ideal for brushless ESCs and digital servos DT3 selection SW1 Throttle fail safe Steering and throttle trim Channel 4 trim Sub trim Steering dual rate adjustment Steering and throttle end point adjustment Channel 3 and 4 end point adjustment, and servo reversing Steering and throttle exponential Auto power off after ten minutes One year limited warranty through Hobby Services beginning at date of purchase
INCLUDES: Futaba 3PV 3-Channel Transmitter, 3-Channel R203GF Receiver, Instruction Manual
REQUIRES: AA Batteries: Four for transmitter (may also be powered by the Futaba HT5F1800B 6V NiMH pack FUTM1482, or the Hobbico LiFe 6.6V SPECS: Transmitter; Transmitting Frequency: 2.4GHz band Power Requirement: Four AA cells Current Drain: 100mA or less Transmission Antenna: Dipole (built in) Communication Method: Two way T-FHSS,one way S-FHSS, FHSS operating system R203GF Receiver, FUTL7603; Dimensions: 1.54 x 0.91 x 0.33" (39 x 26 x 10mm) Weight: 0.28oz (8g) Operating Voltage: 4.8 - 7.4V (shared with servo) Battery Fail Safe Voltage: 3.8V* Current Drain: 30mA at no signal *Battery fail safe voltage is set for 4-cell NiCd/NiMH battery. Battery F/S does not work properly when other type of battery is used Antenna Length: 7.5" (190.5mm)
COMMENTS: For an optional charger, you can use FUTM1832, or if you already have a charger and need a charge lead Futaba Support can sell you part number- HSP29615. (requires soldering on the correct charger plugs) PHONE 217-398-8970 1900mAh pack, HCAM6521
FEATURES: FHSS/T-FHSS, S-FHSS protocols Large, easy to read programming screen Four wheel steering and brake mixing Model data copy Anti-lock brake system (ABS) function R203GF 3-channel receiver is ideal for brushless ESCs and digital servos DT3 selection SW1 Throttle fail safe Steering and throttle trim Channel 4 trim Sub trim Steering dual rate adjustment Steering and throttle end point adjustment Channel 3 and 4 end point adjustment, and servo reversing Steering and throttle exponential Auto power off after ten minutes One year limited warranty through Hobby Services beginning at date of purchase
INCLUDES: Futaba 3PV 3-Channel Transmitter, 3-Channel R203GF Receiver, Instruction Manual
REQUIRES: AA Batteries: Four for transmitter (may also be powered by the Futaba HT5F1800B 6V NiMH pack FUTM1482, or the Hobbico LiFe 6.6V SPECS: Transmitter; Transmitting Frequency: 2.4GHz band Power Requirement: Four AA cells Current Drain: 100mA or less Transmission Antenna: Dipole (built in) Communication Method: Two way T-FHSS,one way S-FHSS, FHSS operating system R203GF Receiver, FUTL7603; Dimensions: 1.54 x 0.91 x 0.33" (39 x 26 x 10mm) Weight: 0.28oz (8g) Operating Voltage: 4.8 - 7.4V (shared with servo) Battery Fail Safe Voltage: 3.8V* Current Drain: 30mA at no signal *Battery fail safe voltage is set for 4-cell NiCd/NiMH battery. Battery F/S does not work properly when other type of battery is used Antenna Length: 7.5" (190.5mm)
COMMENTS: For an optional charger, you can use FUTM1832, or if you already have a charger and need a charge lead Futaba Support can sell you part number- HSP29615. (requires soldering on the correct charger plugs) PHONE 217-398-8970 1900mAh pack, HCAM6521
